Flow-rite Mv-03-fn01 V3 Three-position Automatic Valve Recirc/empty/auto - Barbed, Front Non-pef - MV-03-FN01
Flow-rite
$34.00
Like the V2, the V3 is a reversible check valve that allows a single pump to not only perform the basic livewell functions necessary to keep your catch alive, but does it in a passive or automatic manner. It also has a third closed RECIRC position. By mounting the pump to the valve body, the operator only has to decide whether he wants his livewell functioning or empty. When the first fish is caught, place the valve in the AUTO position and turn on the pump. When the boat is off plane the pump will recirculate and aerate the livewell water and simultaneously blend in a portion of fresh lake water. Used livewell water is expelled out the overflow as fresh water enters to prevent any ammonia build up. When the boat is put on plane, the valves check flapper will prevent water loss out the drain, and allow the pump to continue its recirculation duties. Any water lost out the overflow while running on plane is automatically made up when the boat is brought off plane at the next fishing location. All this is accomplished without any operator assistance. For those times when outside water is not wanted or available, such as, adding ice, livewell additives, going through locks, traveling to out of water weigh-ins, dockside refueling or using our optional Pump-out / Venturi Aerator, place the valve in the RECIRC position. To empty, simply turn off the pump and move the valve to the EMPTY position for gravity draining. The barbed version includes a hose clamp and molded bump. The V3 valve has two cable approach options. The cable can approach the valve from either the front/livewell or the rear/transom side of the boat.
Ideally used in bassboats, flat boats, and other low profile boats for automatic drain control and livewell management
Accepts mounting of one standard aerator pump for both filling and recirculation
Includes closed recirculation mode which allows addition of optional pump-out system
Provides RECIRC / EMPTY / AUTO modes; Operates with the MC-1-03-100 actuator
Cable approach from the front/livewell side of the boat
Ideally used in bassboats, flat boats, and other low profile boats for automatic drain control and livewell management
Accepts mounting of one standard aerator pump for both filling and recirculation
Includes closed recirculation mode which allows addition of optional pump-out system
Provides RECIRC / EMPTY / AUTO modes; Operates with the MC-1-03-100 actuator
Cable approach from the front/livewell side of the boat